You do not need a classic bullet weight for a correct free rig. A free rig uses a freely sliding weight with a round eye, clip or swivel. The weight reaches the bottom first, after which the softbait gets a brief, natural free fall.
This separation is why the free rig works so well for perch and zander. The fish feels less direct resistance than with a fixed jighead, while you still retain clear bottom contact. Tungsten keeps the weight compact, sinks quickly and transmits changes between sand, stone, mussels and silt.
If you mainly want to fish through cover with a true bullet weight, read our guide to Texas and Carolina rigs. For help selecting grams, see choosing tungsten weight by depth, current and bottom.

What is a free rig?
A free rig consists of a sliding weight, hook and softbait. The line passes through the eye or clip of the weight and is then tied to the hook. During the drop, the weight falls quickly. Once it reaches the bottom, the softbait follows more slowly and freely. That short delay creates the natural presentation.
It is especially effective when predators feed close to the bottom but reject direct presentations. You maintain bottom contact without the weight constantly pulling the softbait down.
How to rig a free rig correctly
- Slide a free-rig weight with an eye, clip or swivel onto the line. It must move freely.
- Add a small bead if required. It protects the knot and can create a subtle click on hard bottom.
- Tie on an offset, wide-gap or suitable finesse hook. Match it to the thickness and length of the softbait.
- Mount the softbait straight. A crooked bait rotates, collects debris and loses action.
- Test it beside the bank. The weight should fall first, followed by the softbait.

Free-rig weight versus bullet weight
The difference is freedom of movement and the attachment point. A bullet weight is made to fish compactly against or in front of the bait, mainly for Texas and Carolina rigs. A free-rig weight has an eye, clip or swivel that lets it slide more freely.
| Rig | Weight | When to choose it |
|---|---|---|
| Free rig | Weight with eye, clip or swivel | Natural free fall and subtle bottom contact |
| Texas rig | Bullet weight | Compact, weedless fishing through cover |
| Carolina rig | Bullet or barrel weight with leader | More distance between weight and bait |
| Dropshot | Dropshot weight with line clip | Keeping the bait above the bottom |
When does the free rig work best?
Choose it when you want to fish slowly along the bottom while allowing the softbait to react naturally. Useful situations include hard canal bottoms, quays, rock reinforcement, mussel beds, slopes, urban water and heavily pressured venues.
For perch, use short taps, small hops and pauses. For zander, a slower retrieve often works better: drag, stop, lift briefly and pause again. Many bites feel like added weight or a line that suddenly moves differently rather than a hard knock.
Which weight should you use?
Use the lightest tungsten weight that still provides control. Too much weight removes freedom from the presentation; too little makes bottom and bites difficult to read.
- 3.5–5 g: shallow water, little wind and subtle perch fishing
- 5–7 g: canals, docks and medium depth
- 7–10 g: more wind, deeper water or zander along quays
- 10 g and above: current, deep slopes or repeated loss of bottom contact
Which softbait works?
Choose a bait that moves at low speed. Worms, leeches, small shads and creature baits all work if they are mounted straight and react naturally during the pause. Use subtle, natural colours in clear water and more contrast or UV in coloured water. See our guides to choosing softbait colour and choosing a softbait profile.

How to fish the free rig
Cast out and let the rig descend on light tension. When the weight reaches the bottom, wait briefly so the softbait can follow. Drag it a short distance, pause again and maintain contact without keeping the bait under constant tension.
On hard bottom, let the weight tap deliberately. On soft bottom, fish more subtly because the weight can disappear into silt. Around weed, stone or obstacles, mount the softbait weedless and read our guide to weedless fishing around cover.
Common mistakes
- Using a bullet weight and calling it a free rig: this creates more Texas-rig action and less free fall.
- Fishing too heavy: the softbait loses freedom and falls unnaturally.
- Retrieving too quickly: you remove the important drop after bottom contact.
- Mounting the bait crooked: the rig rotates and hooks less effectively.
- Skipping the pauses: many bites come during or just after a pause.
Conclusion
A free rig is not simply a Texas rig with another name. Use a freely sliding weight with an eye, clip or swivel, select a softbait that moves at low speed and include short pauses. This provides bottom contact while remaining natural enough for cautious perch and zander.
View the W74 Tungsten Swift Lock Weight, the W74 Tungsten Finesse Dropshot Weight and combine them with Perch'ik softbaits.
0 comments